| Item | Code | Dimensions(mm) | Note |
| Body Diameter | D | 10.0max. | |
| Body Height | A | 7.5max.(MG) | |
| 10.0max.(MT/MX) | |||
| Lead Dimensions | d1〜t1 | 0.5〜0.3(＼0.1) | |
| Portion to Cut In Case of Defect | L1 | 4.5＼0.5 | |
| Pitch of Component | P | 12.7＼0.5 | |
| Pitch of Sprocket Hole | Po | 12.7＼0.2 | 10〜Po=127＼1 |
| Lengch from Hole Center to Lead | P1 | 3.85＼0.5 | |
| Lengch from Hole Center to Component Center | P2 | 6.35＼0.5 | |
|
Lead Spacing |
F | 5.0+0.5 -0.2 |
|
| Deviation across TapeCarrier Tape Width | ＠h | 0＼1.0 | |
| Carrier Tape Width | W | 18.5＼0.5 | |
| Hold-dowm Tape Width | Wo | 6.0min. | |
| Position of Sprocker Hole | W1 | 9.0＼0.5 | |
| Hold-dowm Tape Width | W2 | 0+0.5 -0 |
|
| Lead Distance between Reference and Bottom Planes | Ho | 18.0＼0.5 | |
| Distance between Reference and Top | H1 | 26.0max.(MG) | |
| 28.5max(MT/MX) | |||
| Diameter of Sprocket Hole | Do | ø4.0＼0.2 | |
| Total Tape Thickness | t | 0.6＼0.2 | |
| Deviantion across Body Center | ＠s | 0＼0.1 |
